27
User
Manual
Main Menu
Menu level 2
Menu level 3
Menu level 4
Description
Settings
Wireless DMX
CRMX
<on/
off
>
On=CRMX enabled / Off= CRMX disabled
Operating Mode
<
receive
/transmit>
Receive= CRMX module as Receiver
Transmit= CRMX module as Transmitter
Transmit Link
<
no
/yes>
Yes= pair with CRMX devices. CRMX must be
activated on all devices and the pairing must be
picked up by a transmitter (Receive Reset).
No= Linking disabled
Receive Reset
<
no
/yes>
Yes = retain transmitter pairing
No = do not retain transmitter pairing
Pass to DMX Out
<
no
/yes>
Yes= incoming wireless DMX and BLE signal will
be passed to wired DMX out
No= incoming wireless DMX and BLE signal will
not be passed to wired DMX out
Signal Strength
0-100
CRMX signal strength
BLE
<on/
off
>
On= BLE enabled / Off= BLE disabled
BLE Link
<
no
/yes>
Link = starts bluetooth advertising
for at least 1 minute
BLE Password
<
000000
>
Set 6-digits user Password for connection to
your mobile device (ROXXAPP)
Battery
Runtime
4 Hours
6 Hours
8 Hours
10 Hours
12 Hours
14 Hours
16 Hours
18 Hours
20 Hours
22 Hours
24 Hours
"Off" for maximum of brightness.
Set runtime in 2h increments, based on fully
charged battery
Charging
Continous
Continous : charging up to 100% capacity, for
short and medium term fixture storage.
Storage
Charging up to just 40% capacity. Recom-
mended for long term fixture storage and thus
preserves the life of the battery. Once battery
is charged to 40% the display backlight will be
switched off automatically.
Display
Display
<on/
off
>
On= Flip control panel display by
180° (e.g. for overhead installation)
Off= normal control panel dispaly
Backlight
<on/
off
>
On= controls permanent on, display itself will
deactivate after 60 minues of incativity
Off= controls and display deactivation after
approximately 1 minute of inactivity
Auto Lock
<on/
off
>
On= Automatically locks the controls after
approximately 1 minute of inactivity. After
attempted input the display shows: „Locked!“
Unlock process: press arrows up, down, up,
down consecutively
Startup Mode
(using last adjust-
ments of specific
Standalone Modes)
DMX
Select your default operating mode
when fixture is powered on
Auto
Editor
Color Macro
Quick Color
Tunable White
User Color
