20
User
Manual
Once it´s confirmed or denied the display will automatically jump back to level 3.
To stop running a selected Effect please chose “Stop Program” at level 3 or "Stop Stand Alone" at level 2.
For returning back to homescreen please press ESC three times.
At homescreen the selected Stand Alone mode “Auto” and the selected program will be displayed.
*Note:
Using arrows UP /DOWN at homescreen Auto programs can be directly changed according to the list.
Quick Light*
The standalone mode “Quick Light” allows a direct adjustment of the single eyes brightness and dimmer
and shutter.
To adjust your Quick Light please press ENTER to access to main menu (level 1).
While using the UP / DOWN arrows select the menu item “Stand Alone” and confirm
by pressing ENTER. After please select the item “QuickLight” by using the up/down arrows and press ENTER again.
Using UP and DOWN controls, select your desired color and confirm with ENTER.
After you can adjust the brightness for each eye between 000-255 and confirm by ENTER.
Besides the individual color mix also a master dimmer can be adjusted between 000-100.
For strobe effects please adjust the Shutter value between 000-255.
*Note: Please see detailed explanation for strobe effects inside DMX chart at the end of this manual.
Using UP/DOWN arrows at homescreen you can change Quick Light dimmer value.
User
Manual
Effect 1
Auto
Menu
Level 1
DMX Mode
Stand Alone
Slave
Settings
System Info
Stand Alone Mode
Level 2
Stop Stand Alone
Auto
Quick Light
Auto
Level 3
Stop Program
Effect 1
Effect 2
Effect 3
Effect 4
Effect 5
Program
Level 4
Speed <0-100>
(Default 50)
Dim <0-
100
>
Menu
Level 1
DMX Mode
Stand Alone
Slave
Settings
System Info
Stand Alone Mode
Level 2
Stop Stand Alone
Auto
Quick Light
Quick Light
Level 3
Dimmer <
0
-100>
Shutter <0-255>
(Default 20)
LED 1
<0-
255
>
LED 2
<0-
255
>
LED 3
<0-
255
>
LED 4
<0-
255
>
