8
TECHNICAL DATA
Product name
Electric Toaster 4 slice
Electric Toaster 6 slice
Model
RCET-4.1
RCET-6E
Rated voltage [V] / Frequency [Hz]
230~V/ 50Hz
230~V / 50Hz
Rated power[W]
1800
2500
Timer [min]
0 – 5
0 - 5
Dimensions [cm]
31 x 27 x 22
41 x 27 x 22
SCOPE OF APPLICATION
This toaster is only used to prepare toast using suitable toast bread or other suitable breads.
The toaster is not suitable for baking bread or rolls. It is not possible to toast sandwiches (which are served
with for example: sugar, cheese).
The user is liable for any damage resulting from non-intended use of the device.
BEFORE FIRST USE
Upon receipt of the goods, check the packaging for integrity and open it. If the packaging is damaged, please
contact your transport company and distributor within 3 days, and document the damages as detailed as
possible. Do not turn the package upside down! When transporting the package, please ensure that it is kept
horizontal and stable.
DISPOSING OF PACKAGING
Please keep all packaging materials (cardboard, plastic tapes and Styrofoam), so that in case of a problem, the
device can be sent back to the service centre in accurate condition.
INSTALLING THE APPLIANCE
Appliance location
Temperature of environment must not be higher than 50°C.
Keep the device away from all hot surfaces. Always operate the device on flat, stable, clean, refractory and dry
surfaces out of the reach of children and people with mental disabilities. Install the device making sure that
constant access to the main plug is ensured. The power cord connected to the appliance must be properly
grounded and correspond to the technical details!
Rev. 10.02.2017
9
Rev. 10.02.2017
PRINCIPLE OF OPERATION
1-4. toast slots
5. heating switch – 2 toasts (slots 1 and 2 are
heating) or 4 toasts
6. timer
7. crumb-tray
8. lever
1-6. toast slots
7. heating switch – 2 toasts (slots 1 and 2 are hea-
ting) or 4 toasts (slots 1, 2, 3 and 4 are heating) or
6 toasts
8. timer
9. crumb-tray
10. lever
1 2 3 4
5
6
7
8
1
2 3 4
5 6
7
8
9
10
Connect the device to the power source. Insert the bread into the toast slots and switch on the timer to set
the desired baking time. The indicator turns on and the device will start heating for the set time.
When the heating time is up there will be a sound of the bell, indicating that the toasts are ready - lever (8-
RCET-4.1)/(10-RCET 6E)) automatically goes upwards and the toast can be removed.
If the device is not used for a long time, it should be completely disconnected from the power source.
Do not place any bread to be toasted into the unused toasting slots. The bread can be burnt and catch fire.
TRANSPORTATION AND STORAGE
Shaking, crashing and turning upside down of the device should be prevented when transporting it. Store it
in a properly ventilated location with dry air and without any corrosive gas.
CLEANING AND MAINTENANCE
•
Disconnect the device from the electricity when cleaning equipment.
•
Use cleaner without corrosive substances to clean surface.
•
Dry all parts well after cleaning before the device is used again.
•
Store the unit in a dry, cool location, free from moisture and direct exposure to sunlight
REGULAR CONTROL OF THE DEVICE
Check regularly whether the device is damaged. If it should be damaged, please stop using it immediately and
contact your customer service to solve the problem.
What to do in case of a problem?
Please contact your customer service and prepare the following information:
•
Invoice number and serial number (the latter is to be found on the technical plate on the device).
•
If relevant, take a picture of the damaged, broken or defective part.
•
It will be easier for your customer service clerk to determine the source of the problem if you give a
detailed and precise description of the matter. Avoid ambiguous formulations like “the device does not
heat”, which may mean either that it does not heat enough or that it does not heat at all. The more
detailed your information, the better the customer service will be able to solve your problem rapidly
and efficiently!
CAUTION: Never open the device without the authorization of your customer service. This can lead to a
loss of warranty!
RCET-4.1
RCET-6E
