g)
After completing operation of the device, switch it off with the “OFF” button.
The indicator light will turn on.
h)
Unlock the chamber outlet cover and remove the processed food products.
i)
Disconnect the power supply cable.
j)
The mixing mechanism disassembly is done in reverse order to its assembly.
k)
Clean the machine.
NOTE! The agitator features two operation modes. Rotation clockwise
and anti-clockwise. By selecting the proper “ON” button located on the control
panel, the user determines the direction of agitator rotation.
NOTE! In the event the processed food products become locked inside
the chamber it is not necessary to disassemble the device. In order to loosen
the jammed product, switch the direction of rotation to opposite of the
currently used.
3.4.
Cleaning and maintenance
a)
Before cleaning, adjustment or replacement of accessories, and when the
device is not in use, pull the power supply plug and let the device cool down
completely.
•
Wait until the spinning elements stop.
b)
Before cleaning and when the device is not in use, pull the power supply plug.
c)
Use only non-corrosive agents for cleaning the surface.
d)
Only mild cleaning agents designed for cleaning surfaces which come into
contact with food may be used to clean the device.
e)
After each cleaning, all components should be well dried before the device is
used again.
f)
Store the device in a dry and cool place protected from moisture and direct
sunlight.
g)
Do not spray the device with a stream of water and do not immerse it in water.
h)
Ensure that no water enters through the ventilation openings in the housing.
i)
Clean the ventilation openings with a brush and compressed air.
j)
Regularly inspect the device for technical failure and damage.
k)
Use a soft cloth for cleaning.
l)
Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or metal
scraper) as these may damage the surface of the device.
m)
Do not clean the unit with acidic substances, medical products, thinners, fuel,
oil or other chemicals as they may damage it.
DISPOSAL OF USED DEVICES
At the end of its service life, this product must not be disposed of with normal
household waste, but should be taken to a collection point for the recycling of
