c)
The unit may be operated by persons who are physically fit, capable of
operating it and appropriately trained, and who have read this instruction
manual and have been trained in occupational safety and health.
d)
To prevent accidental start-up, make sure the switch is in the off position
before connecting to a power source.
e)
The unit is not a toy. Children should be watched to ensure that they do not
play with the unit.
2.4.
Safe use of the unit
a)
Do not use the unit if the ON/OFF switch does not function properly (does not
turn on and off). Units that cannot be controlled by the switch are unsafe,
cannot operate, and must be repaired.
b)
Disconnect the unit from the power supply before adjusting, cleaning, or
servicing. This precaution reduces the risk of accidental start-up.
c)
Keep unused equipment out of the reach of children and out of the reach of
anyone unfamiliar with the unit or this instruction manual. These units is
dangerous in the hands of inexperienced users.
d)
Keep the unit in good working condition. Check before each use for general
damage or damage to moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the unit). If damaged,
have the unit repaired before use.
e)
Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
f)
To ensure the designed operational integrity of the unit, do not remove
factory-installed covers or loosen screws.
g)
When transporting or moving the unit from storage to the place of use,
observe the health and safety rules for manual handling applicable in the
country where the unit is used.
h)
Do not move, shift, or rotate the unit while in operation.
i)
Do not leave the unit switched on unattended.
j)
Clean the unit regularly to prevent permanent dirt build-up.
k)
The unit is not a toy. Cleaning and maintenance must not be performed by
children without adult supervision.
l)
Do not start up an empty unit.
m)
Do not tamper with the unit to alter its performance or design.
n)
Keep the unit away from sources of fire and heat.
o)
Do not overload the unit.
CAUTION!
Although the product has been designed to be safe, with
adequate safeguards, and despite the additional safety features provided to the
