To change the speed of the appliance, do the following:
1.
Stop the appliance with the START/PAUSE button.
2.
Press the button corresponding to the desired speed.
3.
Switch the machine on by pressing the START/PAUSE button.
SWITCHING ON THE APPLIANCE
1.
Place the bowl on the support arms.
2.
Attach the agitator of your choice (paddle, flat agitator, hook) and check that
it is properly attached (the stop on the agitator shaft should sit tightly on the
fork of the agitator to prevent it from falling out).
3.
Insert the previously prepared food ingredients.
4.
Using the lifting lever, lift the bowl up.
5.
Close the safety guard.
6.
Press the button corresponding to the desired speed.
7.
If necessary, set a timer.
8.
Start the equipment by pressing the START/PAUSE button.
When work is finished, switch off the mixer using the STOP button. Remove the
mixed ingredients. Thoroughly clean the bowl, mixer, safety guard after each use.
CAUTION! The mixer will not turn on if the bowl is not properly raised.
CAUTION! Check that the agitator is properly installed before each use!
RCPM-7.1C MODEL EQUIPMENT:
