6
C603R 010909
Flat wall fix
(FOR REFERENCE ONLY)
Flat wall fix is suitable for a mantel with a minimum 2 1/4" (57mm) internal rebate;
remove the internal rebate from the mantel (Fig .4).
Place the back panel into position and offer the appliance up to the opening in the
back panel.
Offset the panel from the wall so that it is situated against the rear trim frame of the
appliance; use suitable material to bridge the space between the back panel and the
wall (Fig. 4).
Place the mantel into position and secure to the wall using suitable screws & wall
plugs. (PLEASE REFER TO MANUFACTURER’S INSTRUCTIONS FOR
INSTALLATION OF HEARTH & BACK PANEL).
Existing wall
Space to be bridged
Back panel
Fig. 4
Internal rebate
