8
C603R 010909
Care and Use
Fire operation
This appliance has both manual and remote operation.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
For safety and to save compromising the visual look of this appliance the controls
have been located behind the canopy. To access the controls press the top of the
canopy as shown in Fig 11. The canopy will open out from the top to reveal the
controls. Close the canopy once the controls have been set.
DO NOT leave children unsupervised near the appliance when in use.
DO NOT operate the appliance with canopy in the open position (Fig.11).
Power Switch
(Fig. 11)
Press for power on. The lamp and flame effect will come on.
Press again for power off. All functions will be switched off.
Always switch power off when not required to operate.
Manual Heat Operation (Fig. 12)
Press button.
Left hand indicator will glow, allowing selection of heat setting.
For half heat setting (1kW) press the right hand button once. The right hand indicator
glows green.
For full heat setting (2kW) press the right hand button again. The indicator glows red.
To return to flame effect only press the right hand button until the indicator lamp goes
off.
Pressing again switches any heat off, both indicators go off. The flame effect will
stay on.
Press here to open
Press here to close
Open position
Fig.11
Power Switch
