9
C603R 010909
Remote Control operation (Fig. 13)
To prevent accidental heating operation the “Power” button must be pressed and held
down whilst activating the “1000W” or “2000W” buttons.
For half heat setting (1kW) hold down “Power” and press “1000W” button.
For full heat setting (2kW) hold down “Power” and press “2000W” button.
To return to flame effect only, hold down the “Power” button and press the “Flame”
button. This will cancel heating leaving the light and flame flicker effect on.
Alternatively, to cancel heat operation at any time press the button
Minimum operating distance 1 metre from appliance
Maximum operating distance 5 metre from appliance
Maximum operating height 1 metre
If the remote control is not functioning, check the fire using the manual controls.
Replacement 1.5V AAA batteries are widely available. Used batteries should not be
disposed of with general waste, but should be returned to designated collection
points. Contact your retailer, council or local authority for further information.
Note:
The flame effect can only be switched off by using the power switch (Fig.11)
or by disconnecting the appliance from the mains supply.
Flame (no heat)
1000W(1kW)
2000W(2kW)
Power
Fig. 13
Fig.12
Indicator lamps
Buttons
Enable heat
1 kW & 2 kW heat settings
