81
Use lukewarm water and mild detergent on the
painted components to remove dirt, etc.
Clean motorcycle thoroughly with plain water to
remove the detergent.
Never spray water towards bottom side of
instrument cluster directly to avoid water entry
through breather holes.
If possible, use compressed air and blow off water
particles from the obscure areas of the motorcycle,
electrical connections etc.
Once the motorcycle has been ridden in salty
conditions (i.e. during winter in places where road
salt is used) or near coastal areas it is recommended
to wash your motorcycle with cold water after the
ride to prevent corrosion or rust build-up. Please
do not use warm water for washing as it may
damage the motorcycle due to chemical reaction
with the salt. After washing process once the
motorcycle is completely dry it is recommended to
apply anti corrosion spray on all the metal and
chrome plated areas to protect the parts from
corrosion.
It is recommended not to apply the anti-corrosion
spray on the brake discs.
Do not use petrol, brake oil or other flammable
liquids to clean or wash on electronic parts.
The parts chosen using motorcycle configurator
should not be washed with soap or chemical, use
only with plain water.
WASHING PROCEDURE
Royal Enfield All New Classic 350
