79
Preparing the motorcycle for reuse
Remove the anti rust solution from all plated parts
and clean the motorcycle well.
Inflate the tires to the correct tire pressure.
Ensure battery is fully charged and proper
electrolyte level is maintained.
Connect the battery.
Lubricate all control cables and pivots.
Check proper level of oil in engine.
Fill fuel tank with fresh petrol.
Check fuel line for any cracks or cuts.
Clean the air filter.
Remove plastic covering from the silencer.
Remove spark plug on cylinder head and pour
in a few drops of engine oil. Crank engine a few
times to lubricate cylinder walls and piston. Clean
spark plug and refit
Switch on ignition switch.
Start motorcycle and warm up engine for a few
minutes before riding the motorcycle.
NOTE :
Do not raise the engine rpm the moment it is
started, but allow the engine to run at idling
speed.
Caution :
Proper long-term storage is important for the safe,
trouble-free operation of your Royal Enfield
motorcycle.
STORAGE PRECAUTIONS
Summary of Contents for Bullet 500 2018
