Royal Falcon Diadema 2 Group, Owner'S Manual

Page 3

GB

REGULAR USE

Ch. 6A

Coffee delivery is

started by pressing

the relevant push

button and stopped

by pressing it again.

1.

When the machine is switched on, the electro-

nic card checks water level inside the boiler. After

approx. 3 seconds, the filling pump and solenoid

valve are enabled for filling. When the set level is

reached, the card enables the console and its push

buttons. Coffee delivery is started by pressing he

relevant push button and stopped by pressing the

same button again. The above-indicated opera-

tions are signalled by the relevant LEDs lighting

up and going off.

2.

The boiler filling function is disabled while

coffee is being made. If at the end of the coffee-

making cycle the boiler level probe is above the

water level, the boiler filling function will be ena-

bled to restore water level.

3.

2-minute filling time-out. At the end of this

interval, the LEDs will blink and the machine

will stop. Switch the machine on again to restart

it.

4.

Coffee delivery time-out. After 2 minutes,

delivery of the current coffee doses is interrupted.

Safe, and efficient elec-
tronic components

PUSH-BUTTON OPERATION / LEVER OPERATION /
BT BUTTON OPERATION

Ch. 6

1.

Steam is delivered by turning the side knob

with a steam cloud sing on it.

2.

Hot water is delivered by means of the central

knob (or side compact-ergonomic knob) with the

hot water drop sign.

3.

To deliver coffee from the coffee spouts, fill the

filter holder with the correct quantity of coffee

put it back above the coffee spout and press the

relevant push-button on the steel front (if the

machine is fitted with an electronic console, refer

to chapter 7).

4.

The double-range pressure gauge on the front

constantly measures boiler pressure (0,9 - 1,1

BAR) as well as coffee delivery pressure (8-10

BAR).

5.

Adjust pressure inside the boiler to the usual

specifications by means of the relevant screw on

the pressure gauge.

6.

Adjust coffee delivery pressure to the usual

specifications by means of the relevant screw of

the internal pump.

7.

Frequently check the boiler level indicator and

double-range pressure gauge.

8.

To deliver coffee in the lever model, activate

the manual lever positioned latelly to the group.

The coffee machine is
ready to make perfect
coffees always and
everywhere.

INSTRUCTIONS FOR ELECTRONIC DOSING

Ch. 7

1.

Press button  

*

relating to the coffee spout of

the dose to be programmed. Keep it pressed for

longer than 5 seconds and check that all pro-

gramming LEDs on the console light up. This

indicates that the programming function has

been started correctly.

2.

Press any of the buttons corresponding to the

4 doses that can be programmed. The LED corre-

sponding to button

*

and that corresponding

to the dose being programmed remain on.

3.

When the desired quantity of coffee is reached

(4 doses), press any of the dose buttons to inter-

rupt product delivery.

4.

The console on the left automatically stores

the memory of the others. Continuem if neces-

sary, to set the remaining consoles.