Paramount 65X
11
11. TROUBLESHOOTING
Sympton
Cause
Possible Solution
Machine will not turn on:
a. Power plug is not plugged in.
b. Power switch is in “0” (O
position.
c. Tripped circuit breaker.
d. Blown main power fuse.
a. Plug the power cord into
appropriate outlet.
b. Put the power switch to the “I”
(On) position.
c. Reset the circuit breaker.
d. Replace the fuse.
There is power, but the
roller are not turning after
the “RUN” button is pressed:
a. Emergency switch(es) is (are)
engaged.
b. Laser safety sight is tripped
a. Disengage the emergency
switch(es).
b. Remove obstacles or reposition
media
The unit is not heating up:
a. Did not raise the temperature. a. Raise the temperature.
Curled lamination:
a. Upward curl.
b. Downward curl.
a. Loosen the top r
b. Loosen the bottom roll film
tension
c. Blown motor fuse.
b. Replace the motor fuse.
