1. Plug the power cable from the back of the machine into a wall power outlet, and turn the
power switch on.
•
The unit will conduct an automatic self-diagnostics to ensure accurate counts.
•
After five seconds of the counting wheels spinning, the screen will display “0”.
•
If there is a problem, the preset display will show an error code. (See ERROR CODES
– LOCATED ON PAGE 11.)
2. Before counting, select counting settings that are related to your counting needs:
•
Add Mode
: The ADD mode displays the cumulative total of all bills counted. To turn
the ADD mode on, press the “ADD” button.
•
Batch Mode
: The machine is preset to common counting mode, which
automatically counts all bills placed into the hopper. To count bills in batches, press
the “BAT/+1” or the “BAT/-10” button. Both buttons will set the batch quantity to
100. Use the “BAT/+1” button to increase the quantity by 1. Use the “BAT/-10”
button to decrease the quantity by 10. Press the “RESET” button to clear the batch
mode.
•
Count Mode
: By pressing the “COUNT” button this will put the bill counter in basic
count mode. This will turn off all counterfeit detection methods.
PRODUCT OPERATION
6
