5
CONTROL PANEL
Counterfeit Detection (FUNC Button) – All detection methods are enabled once the machine is turned on. If the
machine detects an error due to one of these methods, the machine will stop counting to allow for removal of the
suspect bill and an error code will display.
Ultraviolet Counterfeit Detection (UV)
The Ultraviolet detector will look for suspect bills that use white or bleached paper.
Magnetic Counterfeit Detection
(MG)
The Magnetic detector will look for the presence of magnetic components that are standard in authentic bills.
Infrared Counterfeit Detection (IR)
The Infrared
sensors detect double and half notes and verifies proper dimensional specifications of
banknotes.
Dimensional Detection
(DD)
The Dimensional detector measures the width of the center of each bill, looking for odd sized bills.
Value Button
Select the “VALUE” button to utilize the value counting feature. Please see page 7 for more information.
Reset Button
Press the “RESET” button to reset bill counts.
Add Button
Press the “ADD” button to turn on Add mode.
Manual / Auto Start Button
Press the “M/A” button to flip between Auto and Manual bill counting.
Batch Button
Press the “BATCH” button to turn on Batch mode.