10
MAINTENANCE
TROUBLE SHOOTING GUIDE
Using Cleaning Paper :
1. Turn the laminator ON located on the rear of the machine.
2. Please wait until " Ready Lamp" is steadily lit. Once the ready lamp is steadily
lit place the cleaning paper in the entrance of the machine. Once the paper
has exited the machine fold the cleaning paper so that the inside is now
facing out and again place the paper in the entrance of the machine.
3. Continue repeating step 2 until the paper exits the machine and is not dirty.
* NOTE : Rollers should be cleaned after 10 laminations.
Do not use regular paper to clean the rollers it must be plain coated
white paper.
4. Do not apply any cleaning fluids to the rollers, certain fluids may cause damage.
5. Do not clean rollers with sharp or pointed objects.
6. Use a damp cloth with water to clean the body of the machine.
7. Store machine in a dry clean area.
RHD-2201
Motor doesn't work.
1. Check if the power cord is plugged in.
2. Check if the power is on.
Problem Possible Solution
