8
OPERATING INSTRUCTIONS
1. Place the machine on a flat sturdy surface.
2. Insure the unit is plugged into a properly grounded outlet with the correct
voltage power plug and outlet.
3. Turn the laminator ON located on the rear of the machine.
4. Push on POWER button.
5. Press the HOT FILM or COLD FILM button according to the film you are using
for lamination.
6. If you are laminating several items and need hot lamination for some and cold
lamination for some we recommend you laminate the cold pouch items first to
save time.
7. Choose appropriate laminating thickness and speed using the FND controller,
Please see below temperature and speed table which is standard for RHD-2201.
* Materials to be laminated :
80g = Thin paper such as paper for fax machine or magazine.
120g = Copy paper
200g = Pictures, Catalogues
* NOTE : The weight of paper may vary depending on manufacturers therefore
it is recommended to adjust proper temperature and speed
accordingly.
• We recommend you use Royal Sovereign laminating film.
• The above table is based on Royal Sovereign's film.
RHD-2201
Finishing lamination
(Please turn off the machine when rollers are cooled down)
> Power Off
> Use for Hot Button
Starting lamination
> Power On
> Use for Cold Button
