3
3. INSTALLATION
Note: The laminator should be installed by a trained service technician.
ELECTRICAL REQUIREMENTS
The laminator comes fully assembled, except for the feed table and paper guide to avoid shipping damage.
Upon arrival, thoroughly inspect the unit. It is imperative that any shipping damage is reported and a claim is
filed with the delivering carrier immediately upon receipt.
The laminator should be located in an area with adequate work space for feeding graphics and lamination
materials.
Avoid placing the laminator in a dusty area or near sources of extreme heat or cold.
Once the laminator is in place, lock the casters into position(“ON” position). Always unlock the casters (“OFF”
position) when moving to a different location.
Royal Sovereign recommends that a licensed electrician ensures proper power installation to your laminator in
accordance with electrical codes in your area.
The laminator should have a dedicated power line.
230V UL
120V UL
220V EU
240V UK
220V AU
