background image

RSL-2700

11

RS International Australia PTy. LTD.

30 Prime Drive, Seven Hills, NSW 2147, Australia
TEL  : +61) 2-9674-2127      
FAX  : +61) 2-9674-2027
E-mail : salesaust@royalsovereign.com

CORPORATE HEADQUARTERS

Royal Sovereign International Inc.

2 Volvo Drive, Rockleigh, NJ 07647 U.S.A.
TEL : +1) 800-397-1025     FAX : +1) 201-750-1022
E-mail : info@royalsovereign.com

RS Canada Inc.

5610 Timberlea Blvd, Mississauga Ontario L4W 4M6 CANADA
TEL : +1) 905-461-1095     FAX : +1) 905-461-1096      
TF : +1) 866 961-6673
E-mail : info-ca@royalsovereign.com

RS EUROPE LIMITED.

66 SALISBURY ROAD, WORCESTER PARK, 
SURREY KT4 7DE UK
TEL: +44) 2082243633
E-mail : rseu@royalsovereign.com

WARRANTy

Royal Sovereign International warrants the equipment sold is free from defects in material and workmanship for a period of 
One (1) year for Parts and Labor from the date of installation, excluding lamination rollers which are warranted for Six (6) 
months. This warranty is extended only to the original purchaser. This warranty is the only warranty made by Royal 
Sovereign International and cannot be modified or amended. Royal Sovereign’s sole and exclusive liability and the 
customer’s sole and exclusive remedy under this warranty shall be, at Royal Sovereign’s option, to repair or replace any 
such defective part or product. These remedies are only available if Royal Sovereign’s examination of the product discloses 
to Royal Sovereign’s satisfaction that such defects actually exist and were not caused by misuse, neglect, attempt to repair, 
unauthorized alternation or modification, incorrect line voltage, fire, accident, flood or other hazard.
All warranty claims must be filed through the authorized Royal Sovereign dealer or reseller through which the equipment 
was originally purchased. Model, serial number and date of delivery are required for all claims. 
The warranty made herein is in lieu of all other warranties, expressed or implied, including any warranty or merchantability 
or fitness for a particular purpose. Royal Sovereign will not be liable for personal damage or personal injury (unless 
primarily caused by its negligence), loss of profit, or other incidental or consequential damages arising out of the use or 
inability to use this equipment.      

LIMITED WARRANTy

This warranty specifically does not cover damage to laminating rollers caused by knives, razor blades, or any sharp objects 

or abrasives, or failure caused by adhesives, or damage caused by lifting, tilting or improper use of the machine. Warranty 

repair or replacement by Royal Sovereign or its authorized Reseller(s) does not extend the warranty beyond the initial one 

year period from the date of installation. Unauthorized customer alterations will void this warranty.         

Summary of Contents for RSL-2700












Reviews: