15
SETTING THE DATE AND TIME
__________________________________________________________________
Set the date option to print the current date at the top of each receipt, journal record or management report.
Set the time option to print the current time at the bottom of the receipt. The time will automatically print and display in military –
time (24-hour format). The time prints in the following format: HH•MM. For example: 9:30. If the time is AM, the receipt will
print 9-30. If the time is 9:30 PM, then the receipt will print 21-30.
There is an internal clock and the date and time change automatically as long as the back-up batteries are installed.
Setting the Date:
1.
Enter the program mode by sliding the Control Switch to the "PRG" position.
2.
Type
[the 6-digit number]
representing the current date. Use the format MMDDYY to enter the date. NOTE: Single
digit numbers for months and days must be preceded by a zero [0].
3.
Press
the
[#/NS]
key to store the date.
4.
Continue with the next program or move the Control Switch out of the Program mode.
Example
: Set a date of March 7, 2006
Type/Press: The Display Shows: The Receipt Shows:
[#/NS] 307.06 03·07·06
Date Format: The date will automatically print in the following format: MM-DD-YY (Month-Day-Year). For
example: 03·07·06.
Setting the Time:
1.
Enter the program mode by sliding the Control Switch to the "PRG" position.
2.
Type
[the current time]
using the following format: HHMM. The time MUST be entered in 24-hour format (Military
time)
3.
Press
the
[qty/time]
key to store the time.
4.
Continue with the next program or move the Control Switch out of the Program mode.
Example
: Set the time at 3:30 PM: (with 24-hour format)
Type/Press: The Display Shows: The Receipt Shows:
1530 + [qty/time] 15·30 15-30