39
004778400 - 24/07/2020
E
N
G
L
IS
H
8
HOME PAGE CONFIGURATION
operation.
Before starting, the stove must be powered on by pressing the safety switch on the back:
a) Use the
arrow keys to go to the set-up menu
and press the
key;
b) Select the password “7” with the
key;
c) Scroll with the
keys and select the submenu
[30]
; “
--0
d) Press the
key and enter the value “54” with the
keys;
e) Press
f)
g) To modify, press the
keys;
h) Press
TWO DIFFERENT CONFIGURATIONS CAN BE SET
:
CONFIGURATION 1 (default)
The stove will modulate the power according to the ambient temperature read by the probe on board.
set room temperature.
CONFIGURATION 2
8.1 CONNECTION TO AN EXTERNAL THERMOSTAT
The stove can be connected to a thermostat or chronothermostat.
The external thermostat must be connected to the relevant terminals on the electronic board which are jumpered
in the factory. Disconnect the jumper, therefore, and connect the two thermostat contacts in its place.
It is important to set the stove to
the chronothermostat is in the “called” state. This operation is also necessary in the event of a power failure or
To avoid overlapping operating time bands, we recommend disable the stove timer (set to OFF).
Summary of Contents for Alida Air 120
