44
004778400 - 24/07/2020
10.3.2 Display brightness setting
It is possible to set the dimming of the display brightness when in standby mode.
a) Use the
arrow keys to go to the set-up menu
and press the
key;
b) Select the password "7" with the
key;
c) Scroll with the
key and select the sub-menu
[11]
key;
d) Use the
and
keys to set the desired brightness value (
OFF, 1 ... 5
key.
10.3.3 Display mode setting
It is possible to set what should be shown on the display when the latter is in standby mode
a) Use the
arrow keys to go to the set-up menu
and press the
key;
b) Select the password “7” with the
key;
c) Scroll with the
key and select the sub-menu
[12]
key;
d) Set one of the following values with the
and
keys:
“
OFF
”
•
“
1
”
• All the operating parameters will be displayed cyclically;
“
2
”
• The temperature is displayed (detected by the room probe)
“
3
”
• The current time is displayed
“
4
”
•
has been enabled.
e) Press the key
10.3.4 Volume setting
Set the volume level of the buzzer, according to your requirements:
a) Use the
arrow keys to go to the set-up menu
and press the
key;
b) Select the password “7” with the
key;
c) scroll with the
key and select the submenu
[13]
key;
d) Use the
and
keys to set the desired volume level (
OFF,1 ... 5
key.
10.3.5 Fuel optimisation
pellets, etc.)
Generally speaking, if at the end of combustion, there is a lot of residue in the burn pot, you should change the
a) Use the
arrow keys to go to the set-up menu
and press the
key;
b) Select the password “
7
” with the
key;
c) Scroll with the
key and select the submenu
[14]
key;
d) Set one of the following values with the
and
keys:
“
1
”
“
2
”
“
3
”
e) Press the key
Summary of Contents for Alida Air 120
