Alpha 1000ML User's Guide
44
Programming PLU Descriptions
Programming PLUs with the Optional Barcode Reader
You can use the optional R oyal model PS700 barcode reader to scan items
and automatically ring them up. U sing the barcode reader saves time and
reduces errors caused by people ringing up items incorrectly. T he barcode
reader must be held about ½ inch or closer above the symbol on the
product to read the U P C or other barcode properly.
Important
If you enter the wrong character, press the
Void <bksp>
key to delete the
character. Now you can continue.
To program PLUs using the barcode reader
Programming PLU Set Up
1
Press the
Main menu (on)
key.
2
Press the
Arrow Down
key to select Programming. Press the
Amount
Tend Total <Enter>
key.
3
I f you are prompted for a M anager Passcode, type the passcode number
and then press the
Check
key. I f you did not program a M anager
Passcode, go to the next step.
4
Press the
Arrow Down
key to select P L U Set U p. Press the
Amount Tend
Total <Enter>
key.
5
Press the
Arrow Down
key to select New & E dit. Press the
Amount Tend
Total <Enter>
key.
6
U sing the barcode reader, scan the barcode you want for this PL U . H old
the barcode reader less than ½ inch from the barcode you want to scan.
Press the button on the bottom of the reader. Flick the reader slightly to
move the L E D light along the barcode to read it. T he barcode reader
beeps when it properly reads the barcode. Follow the instructions on the
display.
7
To program the next PL U , go to Next PL U and press the
Amount Tend
Total <Enter>
key.
8
W hen you are done programming, press the
Main menu (on)
key.