80
004778391 - 23/09/2021
10.4 Ordinary cleaning
10.4.1 Cleaning the inside of the firebox
Daily or before each ignition, it is necessary to
check that the burn pot is clean to ensure the
free flow of combustion air from the holes of the
burn pot itself.
Vacuum the ash accumulated in the burn pot
(
Fig. 34
).
Remove the ash from the combustion
chamber as the salts present cause cor-
rosion of the metal. In addition, the ash
could block the passage of air, varying
the development of the flame which, if
it approaches the glass, would increase
corrosion.
After cleaning the burn pot, remove it from its
housing and clean the space where it is con-
tained (
Fig. 34
).
Fig. 34
If necessary, remove the ash drawer and empty
it, making sure to remove any residue in the
compartment where it is contained (
Fig. 35
).
Using an ash vacuum can simplify the
cleaning operations
Fig. 35
10.4.2 Cleaning the glass
This is done with a damp cloth or damp paper
towel passed through the ash (
Fig. 36
).
Rub until the glass is clean.
Do not clean the glass while the stove is on and
do not use abrasive sponges.
ATTENTION
: do not use solvents, acids,
soaps, liquid detergents or aggressive
products.
Fig. 36
