ITALIANO
ENGLISH
FRANÇAIS
004778391 - 23/09/2021
89
14.2 "Eco” Function
By enabling this function, the stove is turned off when the desired room temperature is reached. If
this function is not enabled, the stove modulates its operation to maintain the desired temperature
while consuming as little as possible.
To enable/disable this function:
a) Use the arrow keys to go to the set-up menu and press the
key;
b) Select the password "7" with the
key and confirm with the key;
c) select the submenu
[7]
and confirm with the key .
d) Set one of the following values with the
and keys:
"Eco"
→
It enables the “Eco Mode” function
"Off"
→
It disables the “Eco Mode” function
. Press the key to confirm the set data.
14.3 Re-ignition delta
The re-ignition delta is the number of degrees below the switch-off temperature beyond which
the stove automatically switches on again. For example, if the stove is set to switch off at 20°C (Eco
Mode active) and we set a "Re-ignition delta" of 4°C, the stove will turn back on when it detects a
temperature lower than or equal to 16°C.
To change the value of the re-ignition delta:
a) Use the arrow keys to go to the set-up menu and press the key;
b) Select the password "7" with the
key and confirm with the key;
c) Select the submenu
[8]
and confirm with the key;
d) The value will flash; modify it with the
and keys (
0.5 ... 5.0°C
);
e) Press the key to confirm the set data.
14.4 Anti-freeze temperature
A minimum temperature can be set below which the stove will switch on (outside the set time bands
and only of the timer is enabled). To modify the "antifreeze" temperature value:
a) Use the arrow keys to go to the set-up menu and press the
key;
b) Select the password "7" with the
key and confirm with the key;
c) Select the submenu
[9]
and confirm with the key;
d) The value will flash; modify it with the
and keys (
OFF
;
3...20°C
);
e) Press the key to confirm the set data.
14.5 Keypad lock
With this function, it is possible to block the use of the control panel to avoid accidental changes.
To enable/disable this function:
a) Use the arrow keys to go to the set-up menu and press the
key;
b) Select the password "7" with the
key and confirm with the key;
c) Select the submenu
[10]
and confirm with the key.
d) Set one of the following values with the
and keys:
“Off”
→
Keypad lock deactivated
“Lo”
→
Only the on/off key remains enabled
“Hi”
→
Keypad lock activated
. Press the key to confirm the set data.
