1
2
3
4
2
5
3
1
4
1/2
7/8
20
15
10
5/8
3/4
25
3
2
1
a
SEAM GUIDE ON THE STITCH PLATE
The figure on each guide line on the stitch
plate indicates the distance between this guide
line and the center needle position. Guide the
fabric along the specific guide line in order to
get the desired seam allowance between the
stitching and the edge of the fabric.
TURNING CORNERS
1. Stop the machine when you reach a corner.
2. Lower needle into the fabric.
To lower the needle, you can either use the
needle up/down button or turn the handwheel
toward you.
3. Raise the presser foot.
4. Use the needle as a pivot and turn fabric.
5. Lower the presser foot and resume sewing.
2. Press reverse stitch button and sew 4-5 stitches.
(Using foot control, press pedal while pressing
reverse stitch button).
3. Press start button and resume sewing.
(Using foot control, release reverse stitch button
and press foot control to sew forwards).
4. When you reach the end of seam, press reverse
stitch button and sew 4-5 reverse stitches.
1. Place the fabric in position where reverse stitching
is to be made and lower the presser foot.
Reverse stitching is used to reinforce ends of seams.
REVERSE STITCHING
ENGLISH
SEWING HEAVY FABRIC
When sewing heavy fabrics, the toe end of
presser foot tends to lift up and sewing
cannot be started smoothly. In such case,
set as follows.
1. Raise the presser foot.
2. Push the lock button located on the right
side of regular foot and lower the foot.
3. Start sewing.
As presser foot hinge is locked, fabric will
be feeded smoothly.
A. The presser bar lifter can be raised 1 step
higher for placing heavy materials under
the presser foot easily.
21
Summary of Contents for EVA 8700
Page 1: ...EVA Royal 8700 BRUGERVEJLEDNING INSTRUCTION MANUAL 1 ...
Page 2: ......
Page 3: ...DANSK DANSK ENGLISH ENGLISH 3 ...
Page 4: ...ENGLISH DANSK 4 ...
