23
2. Make sure the appropriate software is installed and running on your
computer. Detailed instructions are provided with the PC link software
package.
3. Touch the [pc link] key and then touch [OK] to start synchronization.
Display will show 'Synchronizing…’
4. When synchronization is complete, the display will show ‘Successful
Synchronization!’ and return to Home Time mode.
CHANGING BATTERIES
The main batteries need to be changed when the “low battery” warning
message appears on the display. To change the batteries, do the
following:
1. Turn off the unit.
2. Use a screwdriver to remove the single screw holding the battery door
in place on the backside of the unit. Then remove the battery cover.
3. Remove every battery gently by pushing the stylus under the battery.
Replace old batteries with fresh CR-2032 batteries.
4. Replace the battery door. Use the screwdriver to position the battery
cover screw back into place.
5. Skip the RESET to prevent loss of previously stored data. Verify
correct time settings.
Note: Replace the batteries once every six months to ensure proper
battery power.
WARNING
THIS UNIT USES CR2032 LITHIUM BATTERIES.
“CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY
REPLACED. REPLACE ONLY WITH THE SAME TYPE BATTERIES
RECOMMENDED BY THE MANUFACTURER. DISPOSE OF USED
BATTERIES ACCORDING TO THE MANUFACTURER’S INSTRUCTIONS.”
Summary of Contents for Excelsior 2
Page 3: ...iii WARNING 23 ...