12
ROYAL Thermal Printer PT-300
1. To change the IP via the Royal PT-300 App:
NOTE:
Check the interface information to see if you can print by
pressing the “FUNC” button in the printer.
a. Download the Royal PT-300 App from AppStore and
install it. F
b. Connect the POS to the printer though the Wi-Fi
interface.
c. Open the Royal PT-300 App and enter the ip address
and port of the printer. Then click in “Connect”.
d. Once the printer is connected, go the “WIFI settings”.
e. Enter current IP address and press “connect”, later
“done”, “Wmode” and “Query info”.
f. Choose STA mode and enter the wireless router
details, set the static IP address and then click “Do it”.
When setting the IP address, make sure the following
information is entered:
FIELD (in STA MODE)
INFO
SSID
The name of the Wi-Fi network that the POS
usually connects to
Password
The SSID WI-FI used earlier
IP address
Write an IP address that is similar to the router's
address (but not the same IP)
IP Gateway
You can set any Gateway IP but avoid conflict to
any current computer's IP
iOS
