FASTENING LEGS ONTO BASE:
Turn base (B) upside down.
Slide leg into slot and line up holes.
1.
ASSEMBLING LEGS:
Insert caps (G) into
leg (H) bottoms.
G
H
2.
Using bolts
(N) and
nuts (O),
fasten legs
to base.
Clips (I) on back of base.
Base, upright, with legs and clips attached.
B
H
If the unit will be positioned against
a “T” unit:
Attach clips (I) to base as
shown on the opposite side from the
legs using the innermost bolt hole.
Note: Clips are not used if the unit
will be standing alone.
I
B
MODULAR MERCHANDISING ASSEMBLY: “L” UNIT
