3.
ASSEMBLING THE FRAME:
Insert Leveler parts (L & M)
into slot on bottom end of
Upright (C).
L
M
C
Insert one of the
Wire Grids (E)
into the channel
on Upright (C).
Note: the end of the Wire Grid must fit into the
hole at the bottom of the Upright channel.
Make sure the
horizontal wires that
are set close together
are at the
bottom
of
the unit.
Insert Screws (J)
into holes at top
and bottom of
Upright.
Insert Grid into
second Upright
channel, then
fasten with Screws
(J) as described
previously.
C
E
MODULAR MERCHANDISING ASSEMBLY: “L” UNIT
