Secure Frame to Base using Screws
(K) at each corner, as shown.
5.
ADDING KICKPLATE AND BASE SHELF:
Hook Kickplate (A) onto tabs on Base.
Base
C
A
F
Once Kickplate is in place, insert tabs
on Base Shelf (F) into first slots on
Uprights (C).
Lower Base Shelf (F) onto Base (B).
To level the Base Shelf (F), you need a
Level and Screwdriver.
Insert Screwdriver into holes on either side
of Base Shelf and adjust Leveler Screw (L)
as needed until upright is plumb, or
with-
out the level
, adjust to suit the end of the
“T” unit or wall condition.
MODULAR MERCHANDISING ASSEMBLY: “L” UNIT
