ROZUM ROBOTICS
PULSE robotic arm
Page
21 | 23
Once the bootup of the control box is over, the green LED goes from blinking to steady
green. Then, the arm starts initializing, too. After the initialization is over, the arm is in the
READY state.
4.
Open your preferred web browser and specify the IP address of the robotic arm in the
browser line and the port number 8080 (see Figure 3.2). The browser page displays the Edit
stage screen of the PULSE DESK software.
Figure 3.2: Browser line with IP address and port number
The IP address is dynamically assigned to the PULSE robotic arm by the DHCP server.
To get the address, you can either
(a)
look up the last assigned IP address on the DHCP
server or
(b)
check the IP addresses of the devices on ports 22 8080 and 8081.
Now, you can program the robotic arm to perform the required operations.
For details, refer
to PULSE DESK.OPERATOR MANUAL.
Summary of Contents for Pulse
Page 1: ......