10
c) have an understanding of the site’s respirator program; and
d) be knowledgable of applicable regulations.
Train each Z-LINK
®
user in the product’s use, application, inspection, maintenance, storage,
fitting, and limitations in accordance with the content of this Instruction Manual and the
approved flow control device Instruction Manual and standard or regulatory requirements.
Ensure that each intended user reads both these manuals.
Ensure that equipment is properly set up, used, and maintained.
Make sure that equipment is properly set up, inspected, fitted, used, and maintained,
including selection of the appropriate air filter cartridge and, when applicable, welding filter
shade adjustments, for the application.
Measure and monitor airborne contaminants in the work area.
Measure and monitor airborne contaminant levels in the work area in accordance with
applicable requirements. Make sure work area is well ventilated.
If you have any questions, contact RPB
®
.
Call Customer Service Department at:
Tel: 1-866-494-4599
Email: customerservice@rpbsafety.com
Web: rpbsafety.com
PRODUCT USER SAFETY INSTRUCTIONS
BEFORE INITIAL USE - BE TRAINED AND MEDICALLY QUALIFIED
Do not use this respirator until you have read this manual and the PX4 AIR
®
PAPR or the flow control
device Instruction Manual (additional copies available at www.rpbsafety.com/resources/) and been
trained in the respirator’s use, maintenance, and limitations by a qualified individual (appointed by
your employer) who is knowledgable about the RPB
®
Z-LINK
®
Respirator.
Do not wear this respirator until you have passed a medical evaluation using a medical questionnaire
or an initial medical examination by a qualified physician or other licensed health care professional
(PLHCP).
Allergens:
No known common allergens are used in this product.
Some materials could cause an allergic reaction in susceptible individuals. If you have a known
allergy or develop irritation, inform your employer. Irritation may occur from lack of cleaning.
Following all cleaning and care instructions provided in the instruction manuals for this and any
other RPB
®
products you are using.
MAKE SURE THE SYSTEM IS READY FOR USE
Make sure you have a complete system.
Verify that you have all required components for the
Z-LINK
®
to serve as a complete NIOSH approved respirator:
EMPLOYER RESPONSIBILITIES
CONTINUED
Summary of Contents for Z-LINK
Page 47: ...47 NOTES...
