8
14
Placement of beam n.º 2
IMPORTANT:
You must apply among each slat a bead
of silicon in the whole length in order to fix
and secure a perfect stability of the whole
structure.
At each end, you must also apply a dot of
silicon between the beam and the aluminum
profile.
CAUTION:
A defective fixation may cause cracks in the
beams, thus is not covered by the warranty.
The 2nd row of beams is installed all around the perimeter of the pool.
Such as the previous row you must verify that all the beams are correctly fitted and leveled.
Once the 2nd row is installed, proceed to the placement of the following rows.
