- 24 -
M
AGNUM
-OP-EN
DECK HEIGHT ADJUSTMENT:
1. To adjust deck height for Brush clearance, loosen
jam nut on adjustment bolt
(A)
, turn adjustment bolt
clockwise to raise Scrubdeck - counterclockwise to
lower Scrubdeck. Retighten jam nut
(SEE BELOW)
.
VACUUM MOTOR:
1. The machine is equipped with a 24 volt,
.75HP Vacuum Motor
(B)
(SEE BELOW)
.
2. If foam or water gets past the Recovery Tank’s Vac
Screen/Ball system, the “Unloader Valve”
(C)
will
drain it from the “Vac Box”
(D)
(SEE BELOW)
.
3. The Vacuum Motor has an
(Optional)
“Foam
Muffl er”
(E)
available to quiet machine operation.
SOLUTION FILTER:
The solution system has an “Inline Filter”
(F)
to fi lter out
cleaning solution prior to scrubbing
(SEE BELOW)
.
CLEANING SOLUTION FILTER:
1. To clean the Solution Filter, fi rst unscrew the
clear cap
(G)
from house
(I)
and remove the
stainless steel screen
(H)
(SEE BELOW)
.
2. Rinse any debris
from the screen
with clean water.
3. Reinstall
screen
and screw cap
back on tightly.
A
C
B
E
D
I
H
G
F
