30
Go-Go
What if all the systems on my scooter seem to be dead?
n
Make certain that the key is fully inserted into the key switch.
n
Check that the batteries are fully charged. See V. Batteries and Charging.
n
Make certain the battery pack is seated properly.
n
Push in the main circuit breakers reset button. See IV. Your Go-Go.
n
Make certain the front-to-rear harness is firmly connected.
n
Be sure the power down timer feature has not been activated. See below.
POWER DOWN TIMER FEATURE
Your scooter is equipped with an energy saving automatic power down timer feature designed to preserve your
scooters battery life. If you mistakenly leave the key in the key switch but do not use your scooter for approxi-
mately 20 minutes, the scooters controller shuts down automatically.
If the power down timer feature takes effect, perform the following steps to resume normal operation.
1. Remove the key from the key switch.
2. Insert the key back into the key switch.
If you experience any problems with your scooter that you are not able to solve, contact your authorised Pride
Provider for information, maintenance, and service.
X . B A S I C T R O U B L E S H O O T I N G
