1
Safety Information
Understand and follow operating instructions carefully.
WARNING
˙
When using test leads or probes, keep your fingers
behind the finger guards.
˙
Remove test lead from Meter before opening the
battery door or Meter case.
˙
Use the Meter only as specified in this manual or
the protection by the Meter might be impaired.
˙
Always use proper terminals, switch position, and
range for measurements.
˙
Never attempt a voltage measurement with the test
lead inserted into the A input terminal.
˙
Verify the Meter’s operation by measuring a known
voltage. If in doubt, have the Meter serviced.
˙
Do not apply more than the rated voltage, as
marked
on Meter, between terminals or between
any terminal and earth ground.
˙
Do not attempt a current measurement when the
open voltage is above the fuse protection rating.
Suspected open circuit voltage can be checked
with voltage function.
˙
Only replace the blown fuse with the proper rating
as specified in this manual.
˙
Use caution with voltages above 30 Vac rms, 42
Vac peak , or 60 Vdc. These voltages pose a
shock hazard.
˙
To avoid false readings that can lead to electric
shock and injury, replace battery as soon as low
battery indicator
<
appears.
˙
Disconnect circuit power and discharge all high-
voltage capacitors before testing resistance,
continuity, diodes, or capacitance.
˙
Do not use Meter around explosive gas or vapor.
˙
To reduce the risk of fire or electric shock do not
expose this product to rain or moisture.
Warning
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . .
Safety sheet
. . . . . . . . .
. . . . . . . . . .
. . . . . . . . . .
. . . . . . . .
. . . . . . . . .
Read First
