8
9
6 in 1 Particle Counter / English
6 in 1 Particle Counter / English
7-3-6.Sample Mode
This setting to set the display mode of particle counter.
When You select the cumulative mode, the particle measurewill display symbol and the meter work in
the cumulative mode.
When you select the differential mode, the particle measurewill display symbol and the meter work in
the differential mode.
When you select the concentration mode, the particle measure will display
symbol and the meter
work in the concentration mode.
7-3-7.Interval
Set the time between samples for the sampling period is greater than one times. The longest interval is
100 seconds.
7-3-8.Level Indication
Select the alarm level of the corresponding particle size in the measurement, when the selected particle
size exceeded,the instrument measuring interface will have exceeded the prompt.
8-HCHO Measurement mode
On the power on mode, you can use the or button to select
,then press ENTER button to
enter the HCHO measure mode, Start to measure HCHO, air temperature and humidity after clearing a
few seconds. Press RUN/STOP button to stop or open the measurement. This mode can take picture and
take video.
8-1.Take Picture Function
On the HCHO mode, you can see
icon, and these icon corresponding to F1,F2,F3
button, press F1 can enter picture taking mode.
icon will appear, you can press F2
button to take picture. Press “ESC” button to exit this mode.
8-2.Take Video Function
On the HCHO mode, you can see
icon, and these icon corresponding to
F1,F2,F3 button, press F2 can enter video taking mode, Press the RUN/STOP button to start the HCHO
measurement, The LCD display
icon, press F2 button to take video and press F2
button again to stop take video, The video file will be auto to saved. Press ESC button to exit this mode.
05/04/2018 Version No. 001
05/04/2018 Version No. 001
Summary of Contents for 174-6576
Page 62: ......
