8
Light meter with USB / English
Connection
1. Switch the light meter on
2. Plug the other end of the connecting cable to serial interface of the PC (USB).
3. Plug the USB line connecting cable 13.6mm jack plug into the meter socket
5. Start the light meter software.
6. Selecting the COM port 3. note select the 4 COM.
(Note: you should better switch the light meter on before you plug the USB line connecting
cable 13.6mm jack plug into the meter)
Installing the software
Stare windows
Close any applications possibly open before installing the “CEM.LINK” software.
Insert the CD into the CD-drive.
Enter x:\setup in the command line and press OK.
The files setup.exe and the help file will be copied onto the hard disk (selected path:
c:\program files\ Lightmeter). x is the drive-letter of your CD-drive ,e.g. ”g”.
Now follow the installation program instructions.
Once the software is installed, switch on the meter.
Start the software.
Selected the COM port 3. note is 4.
If the connection is in order, the following display will be seen on the screen.
If the connection is not in order, the message “NO CONNECTION” appears on the screen.
Manuel d'instructions
RS-8809A
Numéro de stock: 200-3701
Photomètre avec USB
FR
