File No.
:
VersionA1
1
Internal
:
This option is used to adjust the temperature on the
extruder head and the print bed.
3.1 Extrusion head and platform
temperature-rising interface
:
Upward arrow is used to increase the temperature
:
Downward arrow is used to reduce the temperature
:
Left facing arrow is used to return to the previous menu
:
After setting the target temperature, click
“√”
to confirm,
the temperature will start to increase. After the required
temperature is reached, press the back arrow, then perform
the feeding and retreating operation to the extruder head as
listed above.
4. Set-up interface
:
Select this option to enter the platform calibration
interface
:
Select this option to enter the language set-up interface
:
Select this option to enter the version information and
firmware upgrading interface
4.1 Platform calibration interface
:
Select this option to enter the platform calibration
operation, this is used to adjust the level of the print bed
:
Select this option to adjust the distance between nozzle
and platform
rrsp
sprro.c
o.com
om