3
4
Professional True RMS Digital Multimeter/ English
Operating Environment 32oF to 104oF (0°C to 40oC) at
<
70% relative humidity
Storage Environment
-4oF to 140oF (-10oC to 60oC) at
<
80% relative humidity
Operating Altitude
2000 meters maximum
Dimensions/ Weight
(170 x 79 x50mm/342g)
Safety
Complies with UL 61010-1 v.3 for measurement Category lV
600V and Category lll 1000V, Polution Degree 2
Potential danger. Indicates the user must refer to the manual for important
safety information.
Indicates hazardous voltages may be present.
Equipment is protected by double or reinforced insulation.
ndicates the terminal(s) so marked must not be connected to a circuit where
the voltage with respect to earth ground exceeds the maximum safety rating of
the meter.
International Safety Symbols
Safety Category Ratings
Category
Rating
Brief Description
Typical Applications
CAT II
Single phase receptacles
and connected loads
• Household appliances, power tools
• Outlets more than 30ft (10m) from a Cat III source
• Outlets more than 60ft (20m) from a Cat IV source
CAT III
Three phase circuits and
single phase lighting
circuits in commercial
buildings
• Equipment in fixed installations such as 3-phase motors,
switchgear and distribution panels
• Lighting circuits in commercial buildings
• Feeder lines in industrial plants
• Any device or branch circuit that is close to a Cat III source
CAT IV
Connection point to
utility power and outdoor
conductors
• Primary distribution panels
• Overhead or underground lines to detached buildings
• Incoming service entrance from utility
• Outdoor pumps
The measurement category (CAT) rating and voltage rating is determined by a combination of
the meter, test probes and any accessories connected to the meter and test probes.
Maintenance
This Multimeter is designed to provide years of dependable service, if the following care
instructions are performed:
1. KEEP THE METER DRY. If it gets wet, wipe it off.
2. USE AND STORE THE METER IN NORMAL TEMPERATURES. Temperature extremes can
shorten the life of the electronic parts and distort or melt plastic parts.
3. HANDLE THE METER GENTLY AND CAREFULLY. Dropping it can damage the electronic
parts or the case.
4. KEEP THE METER CLEAN. Wipe the case occasionally with a damp cloth.
DO NOT use chemicals, cleaning solvents, or detergents.
5. USE ONLY FRESH BATTERIES OF THE RECOMMENDED SIZE AND TYPE.
Remove old or weak batteries so they do not leak and damage the unit.
6. IF THE METER IS TO BE STORED FOR A LONG PERIOD OF TIME, the batteries should be
removed to prevent damage to the unit.
TT-9519BT
6000 Counts OLED Digital Multimeter
TRUE RMS
Auto
Power
Off
OFF
V
Hz%
Hz%
RANGE
RANGE
MODE
MODE
HOLD
HOLD
RE
RELL
MAX MI N
MAX MIN
LOG/ VIEW
LOG/ VIEW
SET
SET
Hz%
Hz%
10A
10A
10A
MAX
800mA
FUSED
CAT IV 600V
CAT III 1000V
MAX
µAmA
COM
mA
4-20
µA
Hz%
Hz%
Hz%
mA%
mV
4.
Bluetooth
Hz
CAP
CAP
LoZ
Temp
Temp
o
C
o
F
%
1
2
3
4
7
6
5
8
9
10
12
13
11
14
Meter Description
1. OLED display
2. REL/ /LOG/VIEW button
3. RANGE/- button
4. MODE/Bluetooth button
5. MAX/MIN/AVG/ button
6. HZ%/+ button
7. Hold/ Delete button
8. Backlight button
9. Rotary Function Switch
10. 10A input jack
11. V/Ω/H%/CAP/DIODE/TEMP/External
sensor input 3000A input jack
12. µA/mA input jack
13. COM input jack
14. Battery and back cover
Professional True RMS Digital Multimeter/ English
Summary of Contents for 204-8305
Page 48: ......
