Multi Media Cable Tester /
English
2020-10-12/ V001
EN-7
Miswires:
Figure shows that wires 3 and 4 are crossed.
The pin numbers order to indicate the fault.
Split Pair
The following figure shows a split pair on 3, 6 and 4, 5.
The split pair flashes to indicate the fault. LCD will
show “SPLIT” indicate.
In a split pair, continuity from end to end is correct, but
is made with wires from different pairs. Split pairs
cause excessive crosstalk that interferes with network
operation.
※
The
split
pair detects of cable must be at least 5
meter(15ft) in length.
※
If open, short
or
miswire
d
occur, the
split
pair
detects will
not
work.
5.
Press
for more than 2 second
s
to turn the power off.
