IDM 98IV
&
99IV / EN
5
Making Basic Measurements
Preparation and Caution Before Measurement
:
Observe the rules
of
Warnings and
Cautions
The figures on the following pages show how to make basic
measurements.
Caution
When connecting the test leads to the DUT (Device Under Test)
connect the common test leads before connecting the live test
leads ; when removing the test leads, remove the live test leads
before removing the common test leads.
Measuring AC / DC Voltage and Frequency
Rotate the switch and press the Function button to select the
measuring function.
See “Using the Function Button”
