RS, Professionally Approved Products, gives you professional quality parts across all products categories. Our range has
been testified by engineers as giving comparable quality to that of the leading brands without paying a premium price.
Setting Instructions:
Fit the required Extension Rod, place the correct Setting Rod between the micrometer anvils and close the
spindle onto the setting rod using the ratchet stop to make the final adjustment. Proceed as below
1; Press and release ON/OFF button to switch on display
2: Press and hold UNIT button to select either Metric or Inch resolution
3: Press and release ABS/INC button to obtain ABS in display
4: Press and hold SET button until Set appears and flashes on the display
5: Press and hold SET button until Set sign disappears and the first digit start flashing
6: Press and release SET button to change first digit by 1, repeat until required number is displayed
7: Press and hold SET button to advance to the next digit
8: Repeat actions 6 & 7 until all the digits on the display have been programmed
9: Once the last digit has been programmed, press and hold the SET button until Set flashes in the display
10: Press and release SET button to cancel the flashing Set on the display
11: The micrometer is now set and ready for use
Button Functions:
ON/OFF Press and release to turn micrometer ON or OFF
*
SET Press and hold for 2 seconds for preset function in Absolute mode
ABS/INC Press and release to change between Absolute and Relative modes
*
UNIT Press and hold for either metric or inch modes
G Data Output not available
In : Inch Mode
INC : Relative Measuring
ABS : Absolute Measuring
: Battery Voltage is Low
O : Data Output
Set : Set the Origin
Hold : Display value Held
RS, Professionally Approved Products, gives you professional quality parts across all products categories. Our range has
been testified by engineers as giving comparable quality to that of the leading brands without paying a premium price
.
ENGLISH
