13/08/2017 Version No. 001
MeterScope/English
MeterScope/English
13/08/2017 Version No. 001
11
10
5-6 Temperature Measurements
1.Set the function switch to the green
TEMP( C or F) position.
2.press the soft key labeled Menu. Move the
menu selector to the menu item labeled
TEMP. Press the soft key TEMP(C or F).
3.Insert the Temperature Probe into the input
jacks, making sure to observe the correct
polarity.
4.Read the temperature in the display
5.To input a temperature offset value, press
the softkey labeled Offset to open a message
box with the present offset value.
Use and to position the cursor over
one of the digits or the polarity sign.
Use and to scroll through the numbers
for each digit in the offset or switch between
a + or – offset. With the desired value
displayed, press the softkey labeled OK to
set the temperature offset.
.
°
°
5-7.Frequency Measurements
1.Set the function switch to the green Hz%
position.
2.Insert the black test lead banana plug into
the negative COM jack. Insert the red test
lead banana plug into the positive V jack.
3.Read the Frequency in the display
5-8.Resistance Measurements
WARNING:
To avoid electric shock, disconnect power to the unit under test and discharge
all capacitors before taking any resistance measurements.
Remove the batteries and unplug the line cords.
1.Set the function switch to the green
Ω
CAP
position.
2.Insert the black test lead banana plug int
the negative COM jack. Insert the red tes
lead banana plug into the positive
Ω
Jac
3.Read the resistance in the display.
