13
7. If the meter is used near equipment that generates electro magnetic noise, the display may be unstable or
indicate incorrect measurement values.
8.
Maximum rated voltage to earth for voltage measurements terminals is 600V CAT. III.
9. When using the instrument as a Voltmeter or ohmmeter never clamp the jaws around or onto a conductor.
TEST EQUIPMENT RISK ASSESSMENT
Users of this equipment and or their employers are reminded that Health and Safety Legislation require them to
carry out valid risk assessments of all electrical work so as to identify potential sources of electrical danger and
risk of electrical injury such as from inadvertent short circuits. Where the assessments show that the risk is
significant then the use of fused test leads constructed in accordance with HSE guidance note GS38 “ Electrical
Test Equipment for use by Electricians” should be used.
THIS INSTRUMENT MUST NOT BE USED ON UNINSULATED CONDUCTORS AT A VOLTAGE
GREATER THAN 600V ac/dc.
