OPERATION
17/11/2016 Version No. 002
57
Dual Measurement Overview
The dual measurement mode allows you to use the 2nd display to show another
item, thus allowing you to view two different measurement results on the screen.
When the multimeter is used in dual measurement mode, both displays are
updated from either a single measurement or from two separate measurements. If
the primary and secondary measurement modes have the same range, rate and
rely on the same fundamental measurement, then a single measurement is taken
for both displays; such as ACV and frequency/period measurements. If the primary
and secondary displays use different measurement functions, ranges or rates, then
separate measurements will be taken for each display. For example, ACV and DCV
measurements.
Most of the basic measurement functions, except for resistance/continuity can be
used in the dual measurement mode.
Supported Dual Measurement Modes
The following table lists all the measurement functions that are supported with the
dual measurement function.
Supported Dual
Measurement
modes
Primary
Display
Secondary Display
ACV
DCV
ACI
DCI
Hz/P
Ω
ACV
●
●
●
●
●
X
DCV
●
●
●
●
X
X
ACI
●
●
●
●
●
X
