10
11
13/12/2017 Version No. 001
13/12/2017 Version No. 001
7.7 Capacitance Measurements
Warning:
To avoid electric shock, disconnect power to the unit under test and discharge
all capacitors before taking any capacitance measurements. Remove the batteries and
unplug the line cords.
•
Set the rotary function switch to the
Ω
CAP
position.
•
Insert the black test lead banana plug into the negative
COM
jack.
•
Insert the red test lead banana plug into the positive V jack.
•
Touch the test leads to the capacitor to be tested. Read the capacitance value in the
Display.
7.8 Temperature Measurements
•
Set the function switch to the
"Temp”
positive and press the
"MODE"
key to select
the "°C” measuring or "°F” measuring.
•
Insert the Temperature Probe into the input jacks, making sure to observe the correct
polarity.
•
Touch the Temperature Probe head to the part whose temperature you wish to measure.
Keep the probe touching the part under test until the reading stabilizes (about 30
seconds).
•
Read the temperature in the display.
Note:
The temperature probe is fitted with a type K mini connector.
Mini connector to banana connector adaptor is supplied for connection to the input banana jacks.
Digital Multimeter/ English
Digital Multimeter/ English
Summary of Contents for RS-9963T
Page 54: ......