13
Press
▲
or
▼
to select the desired
o
C or
o
F units and then pull
trigger to store the setting.
5. Data memory store and read procedure :
c
To clear the data from the memory:
With the instrument turned off, press and hold the M button,
then pull trigger until “CLR” appears on the LCD.
d
Data memory: Press and hold the M button for 3 seconds to
store the current set of readings into memory.
e
Reading the memory data: Press and hold the R button for
3 seconds to enter READ mode. Press the
▲
or
▼
buttons
to select to desired memory data location. Press the
MODE
button to exit
READ mode.
Ⅷ
. SETTING MODE
Pull trigger to turn the meter on. Press & hold the
MODE
button
for 3 seconds until “SET” appears on the LCD.
1. Parameter settings for measuring:
Under the infrared parameter setting mode, the LCD will
show . Press the
MODE
button to select setting of “
℃
/
℉
”,
“ALM ON/OFF” , “
È
ALM” “ALM
Ç
” and emissivity “
ε
”. Pull
the trigger to exit setting mode and return to normal
measurement mode.
2. Parameter settings:
SET
