background image

OPERATING INSTRUCTIONS

Controls

!

NOTE:

 It is strongly suggested that all audio connections are made with 

the SpotDAP unit's power turned off.

 

 

 

 

 

 

48 VDC 

LINE IN 

L            R 

EQ SETTING 

1 2 3 

48 VDC 

LINE IN 

L  

EQ SETTING 

1 2  3 

Power supply LED 

ENVIRONMENTAL

 

!

SAFETY REGULATIONS

CSA

 

CE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

GENERAL SPECIFICATIONS

Audio Input: 

Unbalanced audio inputs are connected to the two RCA connectors. 

 

 

 

 

 

 

 

The SpotDAP unit is designed to accept line level stereo audio inputs from 

various CD, stereo, or multimedia devices. The SpotDAP unit internally sums 

the stereo input. One or both of the RCA connectors can be used to input an 

audio source See page 16 for acceptable audio input levels. 

 

Connecting Power: 

Make sure the AC cord is properly plugged into the AC/DC power supply. Then 

plug the DC jack into the SpotDAP unit. Plug the AC plug into a properly 

grounded AC outlet. The Status LED indicator on the SpotDAP unit will display 

green indicating the SpotDAP unit is on and functioning. There is no power 

switch on the SpotDAP unit. The SpotDAP unit will automatically turn on if the 

AC/DC power supply is on. The LED on the AC/DC power supply will display 

green if AC power is present. 

 

For Professional Use Only 

 

 

Low Voltage Directive 73/23/EEC (including amendments) 

 

EMC Directive 89/336/EEC 

 

EN60065 (1998)    

Safety for Audio/Video & Musical Instruments 

    Apparatus 

for 

Household, 

Commercial, 

and 

    Similar 

General 

Use 

 EN55103-1 

 

 Emissions 

tests 

 

EN55022 (1998)    

Conducted Emissions 

 

EN55103 (1996)    

Radiated Disturbance Power 

 

EN55103-1, Annex A  

Radiated Magnetic Fields 

 

EN55103-1, Annex B  

Inrush Current Measurements 

 

EN61000-3-2 (1995)  

Powerline Harmonics 

 

EN61000-3-3 (1995) 

 Powerline Flicker 

 EN55103-2 

  

Immunity 

tests 

 

EN55014 (1993)    

Discontinuous Disturbance (“Click”) test 

 

EN61000-4-2 (1995)  

Electrostatic Discharge Immunity 

 

EN61000-4-3 (1995)  

Radio Frequency Immunity 

 

EN61000-4-4 (1995)  

Electrical Fast Transient Burst Immunity 

 

EN61000-4-5 (1995)  

Power Line Surge Immunity 

 

EN61000-4-6 (1994)  

RF Common Mode Immunity 

 

EN61000-4-11 (1994)  

Voltage Dips & Short Interruptions Immunity 

 

EN55103-2, Annex A  

Magnetic Fields 

 

EN55103-2, Annex B  

Audio Frequency Common Mode   

 

 

Operating Temperature:  

0°C to 40°C (32°F to 104°F)

Storage Temperature:  

0°C to 50°C (32°F to 122°F)

Operating Humidity Range:   0 to 95% (non-condensing)
Storage Humidity Range:  

0 to 95% (non-condensing)

18 

Summary of Contents for SpotDAP450













Reviews: